Full Guide | Upgrade Windows Server R2 to Securely.How to upgrade from Windows Server to Windows Server R2 (Standard Edition)? – Super User

This is an introductory tutorial that explains all the fundamentals of Windows Server Audience This tutorial has been designed for all those readers who want to learn the features of Windows Server It is especially going to be useful for all those professionals who are required to install and use this operating system to perform various duties in their respective organizations.

Prerequisites We assume the readers of this tutorial have a practical experience of handling a Windows- based Servers. In addition, it is going to help if the readers have a basic knowledge of how to install and use an operating system.

All the content and graphics published in this e-book are the property of Tutorials Point I Pvt. The user of this e-book is prohibited to reuse, retain, copy, distribute or republish any contents or a part of contents of this e-book in any manner without written consent of the publisher. We strive to update the contents of our website and tutorials as timely and as precisely as possible, however, the contents may contain inaccuracies or errors.

Tutorials Point I Pvt. If you discover any errors on our website or in this tutorial, please notify us at contact tutorialspoint. Windows Server — Overview Windows Server Windows Server codenamed Windows Server 8 is the most recent version of the operating system from Microsoft regarding server management.

But it is not the last one, as the last one is Windows Server Officially it was released on August 1st, and is being sold as a commercial version only. It can add other disks to the storage pools and make available to the users without impacting them.

Each one of them has their own limitation accept the Datacenter version which is also the most expensive one. Windows Server — Installation Windows Server In this chapter, we will discuss regarding the requirements and prerequisites of the Windows Server System Requirements Although most of the servers nowadays probably have the necessary requirements for Windows Server It will certainly be useful to know them in case you want to upgrade from an older system.

One important thing to note here is that the installation process itself will verify your computer hardware and let you know if it qualifies for a Windows Server installation. If not, then you will need to upgrade your hardware. Installation The following steps are to be adhered for the installation of Windows Server At the end, if you decide to buy the license of your Windows server R2.

This will continue for about a couple of minutes as shown in the following screenshot. Step 4: After the files are loaded, you will see the screen of language settings of installation, keyboard, time and currency format. Generally, all the default ones are also good enough to start with.

Click Next. Step 7: Wait until the files are loaded and then you will see the following screen. Step 9: The following screen will appear.

After you have done this process then you can select the partition where the Windows server R2 will be installed in our case we have one partition. Once all this is done, then click on Next. Step Once the reboot is done the following screen will appear.

Step Once all this is done, you have completed the installation process and the following screen will appear. Windows Server — Server Roles Windows Server Like the previous version, Windows Server has the following roles which can be used and in the subsequent chapter, we will see how to install and configure the most important ones.

The following picture shows all the roles. A small reminder! This option is — if you want to install the services in the physical server like being done in the following screenshot. Take a look at the following screenshot for better understanding.

Built on the. Windows PowerShell commands, called cmdlets, let you manage the computers from the command line. Windows PowerShell providers let you access data stores, such as the Registry and Certificate Store, as easily as you access the file system. In addition, Windows PowerShell has a rich expression parser and a fully developed scripting language. So in simple words you can complete all the tasks that you do with GUI and much more. PowerShell Icon can be found in the task bar and in the start menu.

Just by clicking on the icon, it will open. The latest version of PowerShell is 5. In Windows PowerShell ISE, you can run commands and write, test, and debug scripts in a single Windows-based graphic user interface with multiline editing, tab completion, syntax coloring, selective execution, context-sensitive help, and support for right-to-left languages.

You can use menu items and keyboard shortcuts to perform many of the same tasks that you would perform in the Windows PowerShell console. For example, when you debug a script in the Windows PowerShell ISE, to set a line breakpoint in a script, right-click the line of code, and then click Toggle Breakpoint. Or click on the downward Arrow as shown in the following screenshot. The following table will be open — It has three sections, which include — The PowerShell Console with number 1, then Scripting File number 2 and the third is the Command Module where you can find the module.

The first step is to go to the Get-Help command which gives you an explanation about how to give a command and its parameter. Administration of servers is performed through Windows Management Instrumentation. If in case it is disabled, you can enable it by Opening PowerShell and then typing Enable- PSRemoting as shown in the screenshot given below. This allows access to modify the settings for each of the three firewall profiles, which are — Domain, Private and Public and IPsec settings.

As you Know outbound traffic is the traffic generated from server towards the internet and inbound traffic is vice versa. The rules that are currently enabled are denoted by green checkbox icon, while disabled rules display a grey checkbox icon.

It is important because this enables us to work remotely on the server. To do this, we have the following two options. For the first option, we have to follow the steps given below. Step 5: Type user that you want to allow access. It tells how much CPU is consuming every application and on the right side of the table, it monitors in real time the chart of CPU usage.

The Memory tells how much memory every application is consuming and in the right side of the table it is being monitored in real time in the chart of CPU usage. The Disk tab splits it by the different hard drives. The network tab will show the processes and their network bytes sent and received. EXE to install it, but in the version, it is recommended by Microsoft not to use it anymore.

To continue with Installation follow the steps given below. Step 2: Click the Next button. A box will be explaining additional roles services or features which are also required to install domain services.

Now that the installation of DC role is finished, you have to configure it for you server. Once selected fill in a DSRM password in the provided password fields.

The server will restart several times. The installation is now complete. To Create an OU user, please follow the steps given below. Step 2: To create an OU named Management. Check the Protect container from accidental deletion option. This option will protect this object from accidental deletion. Step 6: Now type-in the password. When ReFS is used in conjunction with a mirror space or a parity space, detected corruption — both metadata and user data, when integrity streams are enabled — can be automatically repaired using the alternate copy provided by Storage Spaces.

Historically, file systems were often susceptible to data corruption that would require the system to be taken offline for repair. With ReFS, if corruption occurs, the repair process is both localized to the area of corruption and performed online, requiring no volume downtime.

Although rare, if a volume does become corrupted or you choose not to use it with a mirror space or a parity space, ReFS implements salvage, a feature that removes the corrupt data from the namespace on a live volume and ensures that good data is not adversely affected by non-repairable corrupt data. Because ReFS performs all repair operations online, it does not have an offline chkdsk command. The integrity scanner periodically scans the volume, identifying latent corruptions and proactively triggering a repair of that corrupt data.

Unrecoverable corruption of the ReFS directory metadata affects only those files that are in the directory in which the corruption has occurred. Using MSA, you can considerably reduce the risk of system accounts running system services being compromised. MSA has one major problem which is the usage of such service account only on one computer. It means that MSA Service Accounts cannot work with cluster or NLB services, which operate simultaneously on multiple servers and use the same account and password.

Retrieved 8 June Archived from the original on January 21, Windows Hardware Engineering Conference Archived from the original EXE on December 22, Retrieved September 1, Retrieved June 15, Archived from the original on April 30, January 21, Archived from the original on February 2, January 6, Archived from the original on September 9, Vista SP1 — Which is fastest? Retrieved June 1, Windows IT Pro.

Archived from the original on April 22, Retrieved August 9, Microsoft Windows. Components History Timeline Criticism. Windows 1. Windows 95 Windows 98 Windows Me. Embedded Compact CE 5. Phone 7 Phone 8 Phone 8. Cairo Nashville Neptune Odyssey. List of versions Comparison Category.

Categories : Windows Vista. Hidden categories: Articles with short description Short description matches Wikidata Good articles. Namespaces Article Talk. Views Read Edit View history. Help Learn to edit Community portal Recent changes Upload file. Download as PDF Printable version.

Part of a series of articles on. Editions Windows Server Windows Mobile 6. OEM licensing in emerging markets [13]. Partial no support for HD content creation. Partial no support for HD content creation 4. Partial 6. Disabled by default. No Share center. No P2P. Partial desktop composition only. No P2P meeting. View only. Yes optional. Yes Enhancements available in Windows Ultimate Extras.

Windows server 2012 foundation upgrade to standard free

Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support. The recommended way to free a domain is to promote domain controllers that run newer versions of Windows Server and demote older domain controllers as needed. That method is preferable to upgrading the operating system of an existing domain controller. This list covers general steps to follow before you promote a domain controller that runs a newer version of Windows Server:.

Verify the target server meets system requirements. Verify Application compatibility. Verify security settings. Check connectivity to the target server from the computer where you plan to windows server 2012 foundation upgrade to standard free the installation. You can delegate permissions to install AD DS. For more information, see Installation Management Tasks. Steps-by-step instructions to promote new and replica Windows Server domain controllers using Windows PowerShell cmdlets and Server Manager can be found in the following stadard.

Prior to the release of Windows 8, Windows Update managed its own internal schedule to check for updates, and to download and install them. It required that the Windows Update Agent was always running in wndows background, consuming memory and other system resources. Windows 8 and Windows Server introduce a new feature called Automatic Maintenance. Automatic Maintenance consolidates many different features that each used to manage its own scheduling and execution logic. This consolidation allows for all these components to use far less system resources, work windows server 2012 foundation upgrade to standard free, respect the new Connected Standby state upgtade new device types, and consume less battery on portable devices.

Because Windows Upgtade is a part of Automatic Maintenance in Windows 8 and Windows Serverits own internal schedule for setting a day and time to install updates is no longer effective. To help ensure consistent and predictable restart behavior for all devices and computers in your windows 10 home download usb install free download, including those that run Windows 8 and Windows Serversee Microsoft KB article or see October cumulative rollupt configure policy settings described in the WSUS blog post Enabling a more predictable Windows Update experience for Windows 8 and Windows Server KB The following table summarizes new features for AD DS in Windows Server R2, with a link to more detailed information foundaation it is available.

For a more detailed explanation windows server 2012 foundation upgrade to standard free some features, including their requirements, see What’s New in Active Directory in Windows Server R2.

The following table summarizes the new features for AD DS in Windows Serverwith a link to more detailed information where it is available. To help ensure consistent and predictable restart behavior for all devices and computers in your enterprise, including those that run Windows 8 and Windows Serveryou can configure the following Windows server 2012 foundation upgrade to standard free Policy settings:. The following table lists some examples of how to configure these settings to provide desired restart behavior.

Error conditions can be corrected to eliminate concerns from a partially complete upgrade. The wizard also exports a Windows PowerShell script that contains all fred options that were specified during the graphical installation. Taken together, the AD DS installation changes simplify the DC role installation process and reduce the likelihood of administrative errors, especially when you are deploying multiple domain controllers across global regions and domains. For administrators that segver to foundationn the introduction of schema changes in an Active Directory forest independent of the installation of Windows Server DCs in an existing forest, Adprep.

Beginning with Windows Serverdomain controllers also have the following secure default settings, compared to domain controllers that run Windows Server or Windows For more information about system requirements and pre-installation information, see Installing Windows Server There are no additional system requirements to install a new Active Directory forest, but you should add sufficient memory to cache the serger of Active Directory database in order to improve performance for domain controllers, LDAP client requests, and Active Directory-enabled applications.

If you are upgrading an tree domain controller or adding a new domain controller to an existing forest, review the next section to ensure the server meets disk space requirements. This section covers disk space requirements only for upgrading domain controllers from Windows Server or Windows Server R2. For more information about disk space requirements for upgrading domain controllers to earlier versions of Windows Server, see Disk space requirements for upgrading to Windows Server or Disk space requirements for upgrading to Windows Server R2.

Size the disk that hosts the Active Directory database and log files in order to accommodate the custom and application-driven schema extensions, application and administrator-initiated indexes, plus space for the objects cc photoshop adobe free attributes that winndows will be added to the directory over deployment life of the domain controller typically 5 to 8 years.

Right sizing at deployment time is typically a servre investment compared to greater touch costs required to expand disk storage after deployment. On domain controllers that you plan to upgrade, make sure that the drive that hosts the Active Directory database NTDS.

DIT file before you begin the operating system upgrade. If there is insufficient free disk space on the volume, the upgrade can fail and the upgrade compatibility report returns an error indicating insufficient free disk space:.

In this case, you can try an offline defragmentation of the Active Directory database to recapture additional space, and then retry the upgrade. In standdard releases, Windows Server editions differed in their support of server roles, processor counts roundation large memory support.

The Windows server 2012 foundation upgrade to standard free and Datacenter editions of Windows Server support all features and underlying hardware but vary in shandard virtualization rights – two virtual instances sgandard allowed for Standard edition and unlimited virtual instances are allowed for Datacenter edition.

The following Windows client and Windows Server operating systems are supported for domain member computers with foundaton controllers that run Windows Server or later:. You cannot upgrade domain controllers that run Windows Server or bit versions of Windows Server To replace them, install domain controllers windows server 2012 foundation upgrade to standard free run a later version of Windows Server in the domain, and then remove the domain controllers that Windows Server Note that you cannot convert a domain controller that runs an evaluation version of Windows Server directly to a retail version.

Instead, install an additional domain controller on foundatoon server that runs a retail version and remove AD DS from the domain controller that runs on the windows server 2012 foundation upgrade to standard free version.

Due to a known issue, you cannot upgrade windows server 2012 foundation upgrade to standard free domain windows server 2012 foundation upgrade to standard free that runs a Server Core installation of Windows Server R2 to a Server Core installation of Windows Server The upgrade will hang on a solid black screen late in the upgrade process.

Rebooting such DCs exposes an option in boot. An additional reboot triggers the automatic rollback to the previous operating system version. Until a solution is available, it is recommended that you install a new domain controller segver a Server Core installation of Windows Server instead of in-place upgrading an existing domain controller that runs a Server Core installation of Windows Server R2. For more information, see KB article Windows Server requires a Windows Server forest functional level.

That is, before you can add a domain controller that runs Windows Server to an existing Active Windkws forest, the forest functional level must be Windows Server or higher. This means that domain controllers that run Windows Server R2, Windows Serveror Windows Server can operate in the same forest, but domain controllers that run Windows Server are not supported and will block installation of a domain controller that runs Windows Server If the forest contains domain controllers foyndation Windows Server or later but the forest functional level is still Windowsthe installation is also blocked.

Windows domain controllers must be removed prior to adding Windows Server domain controllers to your forest. In this case, consider the following workflow:.

The new Windows Server domain functional level enables one new feature: founsation KDC support for claims, compound authentication, and Kerberos armoring KDC administrative template policy has two settings Always provide claims and Fail unarmored authentication requests that require Windows Server domain functional level. The Windows Server forest fres level does not provide any new features, windows server 2012 foundation upgrade to standard free it ensures that any new domain windows server 2012 foundation upgrade to standard free in the forest will automatically operate at the Windows server 2012 foundation upgrade to standard free Server domain functional level.

The Windows Server domain functional level does not provide other new features beyond KDC support for claims, servsr authentication, and Kerberos armoring. But it ensures that any domain controller in ugprade domain runs Windows Server After you set the servdr functional level to a certain value, you cannot roll back or lower the forest functional level, frse the following exceptions: after you raise the forest functional level to Windows Serveryou windows server 2012 foundation upgrade to standard free lower it to Windows Server R2.

If the forest functional level freee set to Windows Server R2it cannot be rolled back, for example, to Windows Server After you set the domain functional level to upgtade certain value, you cannot roll back or lower the domain functional level, with ссылка на подробности following exceptions: when you raise the domain functional level to Windows Server R2 or Windows Frewand if the forest functional level is Windows Server or lower, you have the option of rolling the upgrde functional level back to Windows Server or Windows Server R2.

If the domain functional level is set to Windows Server R2it cannot be rolled back, for example, to Windows Читать Beyond functional levels, a domain controller that runs Foundahion Server provides additional windows server 2012 foundation upgrade to standard free that are not available on a domain controller that runs an earlier version of Windows Server.

For example, a domain controller that microsoft office 2007 gujarati font free free Windows Server can be used for virtual domain controller cloning, whereas a domain controller that runs an earlier version fee Windows Server cannot. But virtual domain controller cloning and virtual domain controller safeguards in Windows Server do not have any functional level requirements. Microsoft Exchange Server requires a forest functional level of Windows server or higher.

AD DS cannot be installed on a server that also runs the following server roles or role services:. Though they are not operations master roles, another change in AD DS installation is that DNS server role and the global catalog are windows server 2012 foundation upgrade to standard free winodws default on all domain controllers that run Windows Server Improvements in AD DS beginning in Windows Server foundatiom safer virtualization of domain controllers and посмотреть еще ability to clone domain controllers.

Cloning domain controllers in turn enables rapid deployment of additional domain controllers in a new domain and other benefits. The following table covers common Active Directory-integrated Microsoft applications. The table covers what versions of Windows Server that the applications can be installed on and whether the introduction of Windows Server DCs affects application compatibility.

Configuration Manager Configuration Manager Service Pack 1: Microsoft will add the following operating systems to our client support matrix with the взято отсюда of Service Pack 1: – Windows 8 Pro – Windows 8 Enterprise – Windows Server Standard – Windows Server Datacenter All site server roles – including site servers, SMS providers, and management points – can be deployed to servers with the following operating system editions: – Windows Server Standard – Windows Server Datacenter Microsoft Endpoint Configuration Manager current branch Supported operating systems for Configuration Manager site system servers.

It cannot be run on a Server Core installation. It windoqs be run on virtual servers. Lync Server Lync Server can be installed on a new not upgraded installation Windows Server источник October cumulative updates for Lync Server are installed. Upgrading the operating system to Windows Server for an existing installation of Lync Server is not supported.

Windows Server Update Services 3. Exchange Windows Server Standard and Datacenter are go for the roundation roles: schema master, global catalog server, domain controller, mailbox and client access server role Forest Functional Level: Windows Server or higher Source: Exchange System Requirements Exchange Source: Exchange Service Pack 3 Exchange with Service Pack 3 can be installed on Sefver Server member servers.

Exchange System Requirements lists the upgarde supported schema master, global catalog and domain controller as Windows Server R2. Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Table of contents Exit windows server 2012 foundation upgrade to standard free mode.

Table of contents. Note Microsoft Exchange Server requires a forest functional level of Windows server or higher. Note Though they are not operations master roles, another change in AD DS installation is that DNS server role and the global catalog are installed by default on all domain controllers that run Windows Server Submit and view feedback for This product This page.

View fres page feedback. In this article. Workplace Join. Allows information workers to join their personal devices with their company to access company resources and читать статью. Web Application Proxy. Active Directory Federation Services. AD FS has simplified deployment and improvements to enable users to access resources from personal devices and help IT departments manage access control.

The Ultimate List of Windows Server Versions – Up to Windows Server | ServerPronto University.Upgrade Windows Server R2 Foundation to Standard – Spiceworks

It will certainly be useful to know them in case you want to upgrade from an older system. One important thing to note here is that the installation process itself will verify your computer hardware and let you know if it qualifies for a Windows Server installation. If not, then you will need to upgrade your hardware. Installation The following steps are to be adhered for the installation of Windows Server At the end, if you decide to buy the license of your Windows server R2.

This will continue for about a couple of minutes as shown in the following screenshot. Step 4: After the files are loaded, you will see the screen of language settings of installation, keyboard, time and currency format.

Generally, all the default ones are also good enough to start with. Click Next. Step 7: Wait until the files are loaded and then you will see the following screen. Step 9: The following screen will appear. After you have done this process then you can select the partition where the Windows server R2 will be installed in our case we have one partition.

Once all this is done, then click on Next. Step Once the reboot is done the following screen will appear. Step Once all this is done, you have completed the installation process and the following screen will appear. Windows Server — Server Roles Windows Server Like the previous version, Windows Server has the following roles which can be used and in the subsequent chapter, we will see how to install and configure the most important ones.

The following picture shows all the roles. A small reminder! This option is — if you want to install the services in the physical server like being done in the following screenshot. Take a look at the following screenshot for better understanding. Built on the.

Windows PowerShell commands, called cmdlets, let you manage the computers from the command line. Windows PowerShell providers let you access data stores, such as the Registry and Certificate Store, as easily as you access the file system. In addition, Windows PowerShell has a rich expression parser and a fully developed scripting language. So in simple words you can complete all the tasks that you do with GUI and much more. PowerShell Icon can be found in the task bar and in the start menu.

Just by clicking on the icon, it will open. The latest version of PowerShell is 5. In Windows PowerShell ISE, you can run commands and write, test, and debug scripts in a single Windows-based graphic user interface with multiline editing, tab completion, syntax coloring, selective execution, context-sensitive help, and support for right-to-left languages.

You can use menu items and keyboard shortcuts to perform many of the same tasks that you would perform in the Windows PowerShell console. For example, when you debug a script in the Windows PowerShell ISE, to set a line breakpoint in a script, right-click the line of code, and then click Toggle Breakpoint. Or click on the downward Arrow as shown in the following screenshot. The following table will be open — It has three sections, which include — The PowerShell Console with number 1, then Scripting File number 2 and the third is the Command Module where you can find the module.

The first step is to go to the Get-Help command which gives you an explanation about how to give a command and its parameter. Administration of servers is performed through Windows Management Instrumentation. If in case it is disabled, you can enable it by Opening PowerShell and then typing Enable- PSRemoting as shown in the screenshot given below.

This allows access to modify the settings for each of the three firewall profiles, which are — Domain, Private and Public and IPsec settings. As you Know outbound traffic is the traffic generated from server towards the internet and inbound traffic is vice versa.

The rules that are currently enabled are denoted by green checkbox icon, while disabled rules display a grey checkbox icon. It is important because this enables us to work remotely on the server. To do this, we have the following two options.

For the first option, we have to follow the steps given below. Step 5: Type user that you want to allow access. It tells how much CPU is consuming every application and on the right side of the table, it monitors in real time the chart of CPU usage.

The Memory tells how much memory every application is consuming and in the right side of the table it is being monitored in real time in the chart of CPU usage. The Disk tab splits it by the different hard drives. The network tab will show the processes and their network bytes sent and received. EXE to install it, but in the version, it is recommended by Microsoft not to use it anymore. To continue with Installation follow the steps given below. Step 2: Click the Next button.

A box will be explaining additional roles services or features which are also required to install domain services. Now that the installation of DC role is finished, you have to configure it for you server. Once selected fill in a DSRM password in the provided password fields. The server will restart several times. The installation is now complete. To Create an OU user, please follow the steps given below.

Step 2: To create an OU named Management. Check the Protect container from accidental deletion option. This option will protect this object from accidental deletion. Step 6: Now type-in the password. When ReFS is used in conjunction with a mirror space or a parity space, detected corruption — both metadata and user data, when integrity streams are enabled — can be automatically repaired using the alternate copy provided by Storage Spaces.

Historically, file systems were often susceptible to data corruption that would require the system to be taken offline for repair. With ReFS, if corruption occurs, the repair process is both localized to the area of corruption and performed online, requiring no volume downtime.

Although rare, if a volume does become corrupted or you choose not to use it with a mirror space or a parity space, ReFS implements salvage, a feature that removes the corrupt data from the namespace on a live volume and ensures that good data is not adversely affected by non-repairable corrupt data. Because ReFS performs all repair operations online, it does not have an offline chkdsk command. The integrity scanner periodically scans the volume, identifying latent corruptions and proactively triggering a repair of that corrupt data.

Unrecoverable corruption of the ReFS directory metadata affects only those files that are in the directory in which the corruption has occurred. Using MSA, you can considerably reduce the risk of system accounts running system services being compromised. MSA has one major problem which is the usage of such service account only on one computer. It means that MSA Service Accounts cannot work with cluster or NLB services, which operate simultaneously on multiple servers and use the same account and password.

This group should be created before in the Groups. In the This account box in the Log on tab type the name of the service account. After the changes are saved, the service has to be restarted. We have selected the name as Test GPO. Step 7: Click Next. Step 9: Click Close. Please follow the steps given below. To do this, we need to follow the steps given below. Step 8: Enter your IP range in the exclusion list. It helps us to resolve domain names internally and externally to IP and to have access to the requested service for the respective domain.

Let us now see how to install the DNS Role. For this we need to follow the steps given below. Step 2: Click Next. Step 7: Click Install. Once the installation is finished, click on Close. Step 3: Enter the name of the primary Zone for which you want to manage the records. So, when we will type-in our browser www. You can use it for troubleshooting purpose when the upgrade fails. Copy and store the system information. Copy and store the configuration information.

Select Download updates, drives and optional features recommended and click Next. Whether you need to enter a license key to proceed is depending on the distribution channel you received the Windows Server setup media from. Choose an edition of Windows Server that you want to install, click Next.

Accept the terms, then you can choose whether to keep personal files and apps. Click Next to continue. Wait for a while and click Install to start upgrading. After finishing, your PC will automatically restart. It also has some conspicuous limitations such as the 2 TB limit for backup, the numbers of backups it could keep, the lack of individual file backup feature, etc. It has different editions, and the Server edition is specially designed for Windows Server. For instance, you can create scheduled incremental or different backup , set up retention policy to auto delete older backup, restore system image to different hardware, etc.

And the operation is much simpler than WSB. Moreover, it contains Sync features to copy your data with original format and structure, Clone features to duplicate hard drive and therefore migrate Windows Server to SSD.

Have a try and find more practical tools. Click Backup on the left pane and choose a backup type. Optionally, you can also use System Backup in case of upgrade failure. Tap Add Folder or Add File to select the data you want to backup, then specify a destination to store it. For the destination path, you can choose to Select a network location or Select a cloud in the drop-down menu.

After that, you can manage more settings to customize the backup, and then Start Backup. Options: Manage compression level, image splitting, backup encryption, comment, email notification, etc. With this simple operation, you could backup whatever you want to keep before upgrading Windows Server r2 to Thus even if something goes wrong in the process of upgrading, you can easily retrieve important files or restore the operating system to an earlier state.

Besides, if you want to upgrade Server or to through clean installation, backup is especially essential.

In addition to basic data protection, it also enables you to automatically backup Windows Server to cloud, bare metal restore Windows Server to different hardware , restore Windows Server to virtual machine and so on.